|
|
BORFLEX RHÔNE-ALPES
For each activity its
wheel roller :
-
For deburring, a 80 sh
machined roller wheel is advisable
-
For general use, a
hardness of 60 sh with standart machining will give satisfactory
results
-
For finishing, a smooth,
40 sh roller wheel allows correct preparation of castings for
polishing.
|
Rubber
roller wheel
The most widely-used roller wheel, good
resistance to abrasion and grease, smooth or treaded, harness of 35 to
80 shores.
|
 |
|
|
Polyurethane
roller wheel
With a
hardness of 60 to 80 sh, generally used for large loads of soft
metals. It has excellent anti-abrasive qualities and therefore a
longer life-span, but does not resist high temperatures. |
|
Vulkolan
foam roller wheel
With a
hardness of 20 to 40 sh, slatted or smooth it is generally used
in the emerizing of shaped castings. It is replacing more and
more cotton rollers. More aggressive, it is easier to use and
has a better output. |
|
Diameter from 50 mm
to 450 mm and width from 10 mm to 300 mm.
Request
for information
Top
|
